اصدار cccam 3

[السير ادم]

اصدار cccam 3

سيتم انزال اصدار من الاميو الرائع 3 cccam خلال الايام القادمة

سيكون صيحة في عالم الشيرنج وهو قادر علي التعامل مع نظام

نجرافيجن3 وفياكسس القادم 3 و4 يعني ضربة في الصميم

للكروت الجديدة

وسيتعامل مع باقة البريميرا اتوماتيكيا

coming soon

مواصفات الايمو الجديد


كود PHP:
CCcam 3.0


AUTOMATIC K eyupdate for following providers
Premiere, Premiere Star, Digital+ ( Nagra 3 )
SSR SRG ( Schweizer Fernsehen ) ( Viaccess )
Cryptoworks hardencoded bug on CAID 0d22 ( Arena / Tividi )
Only ok with version Version 2.0.1
Channels : AXN, RTL Crime, History Channel, Kinowelt TV don't work because of parental control ( PIN )
NAGRA 2/3 new ROM 142 support
TV Cabo on Hispisat 30 degrees
( Polsat in future )
IRDETO card support improovement
and IIRDETO 2 Version 2 card support
Entitlements corrections
some cards are showing entitlements in HEX form
Chid 7D2B - date 0xcb5 valid 0xfe
Chid 00E1 - date 0xcb5 valid 0xf1
KATHREIN UFS 910 receiver support
TRIPLE DRAGON receiver support
REELBOX receiver support
FRITZBOX ROUTER support
( executable in FRITZBOX router )
NSLU2 support Debianslug
( LSB executable )
Multi EMU
CCcam should be able to run in one session with an other EMU
( CCcam with MGCAMD or CCcam with CAMD3 or CCcam with NP )
NEWCS card's -> LOAD BALANCE
CCCam should be able to identify identical cards connected by newccamd protocol to balance load onto these cards
CAID remapping
CCcam should request ECM under a different CAID
( for example : TV Cabo CAID remap 1802 -> 1801)
LOG output via UDP Port
Shares expiration for clients ( DATE )
F: user password 2 0 0 { 0:0 ) 15.05.2008
Client will get shares until 15.05.2008 ( defined date behind F: line ) Then the shares will expires
Remote AU ( ,,,,,,update ) support
,,,,,,,, on server ( Internet CS or Local CS will update ,,,,,,,, on client box )
Update Softcam.,,,,,, via server for client box
0 Hop filtering
All 0 HOP servers should be filtered/deleted for better CS performance
( Example : In CCcam.cfg : ZERO HOP FILTERING : YES )
More than 1 client access per F: line
( Clients who have more than one receiver. Not like yet : 1 line for 1 client )
( Example : In CCcam.cfg: F: user password x.x.x. { x:x:x } 2
= 2 accesses with one F: line
EMM on decode failed switchable
( for CPU speed improovement )
EMU / CARDREADER / CS -> PRIORITY SETTING
( Define in CCcam.cfg which priority should have : CS / EMU / CARDREADERS )
Emded cardreaders -> ENABLE / DISABLE function
NP EMU ( G: lines ) improvement
( error connections & errors in peers )
REMM/AU to CAMD3 and NEWCS servers
EMM PARSING
on different providers
Understanding of griffin encryption : Bulsatcom & Athina Sat cards
More options for the local cards used at anytime on the server (DM or PC)
Use only these SID`s or ECM PID`s for this card on sci reader or ,,,,,,,,,,,, reader.
Also to add a parameter to force CCcam to access only these readers.
For
now if you start newcs before and occuppies the readers then its ok
otherwise no other option to force CCcam not to use them.
Change the parameters for SID`s on F: line and C: line
They should make it to ALLOW only these sids and BLOCK all the others.
For now is ALLOW all and BLOCK these,which it doesnt work ok with Irdeto cards and a lot of load is hammering identical cards
( CAID 0604 - Nova, Showtime, ART )
What a mess if you have 3 cards like them ...
One "open" protocol as server
( for example NEWCS ) for use in heterogene EMU networks
More than one CA/ID per L: (CAMD3) line
( Wildcards )
Possibility to use the postinit in mode auto not only when CCcam start
Like the NP EMU, where you can place a file on tmp and he send directly to slot.
Dbox2 Multicam cardreader support
Examples : COM2 = /dev/tts/1 and/or COM1 = /dev/tts/2
Support of pure NAGRA cards
Kabel Deutschland - K09 card
ENTAVIO smartcard
Support improvement of SC8in1 cardreader
Problem : Often loosing cards
SC8in1 recognizing in all different CCcam versions ( CCcam.x86 )
Load On Demand (LOD) feature
Load On Demand ( LOD ) for different modules ( functions )
Load On Demand for ,,,,,,If / NewCS / G,,,,X / ...
Support of feynman protocol from "new" NEWCS
Possibility to add a card coming from a local server as local card to CCcam instead of HOP1 card.
( L: , N: , R: lines )
PID logging file ( PID.INFO )
like MGCAMD does -> easier way to create a CCcam.prio
ECM: CaID: 0x1801 -> CaPID: 0x1672 ProvID: 000000
ECM: CaID: 0x1702 -> CaPID: 0x100E ProvID: 000000
VIASAT Nordic card initialize failure
Since CCcam version 1.2.0 -> Failure to initialize these cards - NDS - CAID 090F
( With CCcam 1.1.1 work fine )
Global limit list feature
GLOBALLIMITS: { 0:0:0, 100:2f:2, 1002, 100 6:2, .... } and on C: line if you want to use this list :
C: ( { caid:id(:uphops), caid:id(:uphops), ... } )

المصدر: mhiptv.org/forums

---

hw]hv cccam 3

[mhiptv]

مشكور جداً على هذا الخبر المميز والمفرح والذى يعطى بصة امل جديدة لتطوير انظمة السى سى كام

[السير ادم]

نورتنا بمرورك العطر
مديرنا الغالي